Add to Wishlist
AP900
goldcruise-CM22
STALK_600x600-510×510
s-l1600

Command Cruise Control

    • SET (at current road speed)
    • RESUME (to last set speed)
    • ACC and DEC (for minor speed increase/decrease while engaged)
    • Immediate brake disengage
    • Immediate clutch disengage (on manual vehicles fitted with optional clutch switch)

    Installation services available in Brunswick, Melbourne

    Enquire Now

    Category:

    ‘900’ SERIES ELECTRONIC INTERFACE.
    MORE THAN JUST A CRUISE CONTROL

    Features include:

    • SET (at current road speed)
    • RESUME (to last set speed)
    • ACC and DEC (for minor speed increase/decrease while engaged)
    • Immediate brake disengage
    • Immediate clutch disengage (on manual vehicles fitted with optional clutch switch)

    Newer modern features include:

    • Voluntary speed limiter mode
    • Coast function (on CM30/CM35 model)
    • Fixed speed limiter mode
    • Speed Alert
    • On-road or PC calibration
    • CANbus capable (selected models)
    • New ‘ self-learning’ technology
    • Multiple switches available for the consumer (see switch listing)

    90AP900 – Drive By Wire Cruise Control with Speed Limiter and Speed Alert

    90AP900C – CANbus Cruise Control with Speed Limiter and Speed Alert

    Lite-On Automotive Electronics and Command Auto Group Pty Ltd have developed an electronic interface Cruise Control for Drive by Wire vehicle applications.

    After significant product testing and evaluation, the ‘900’ Series is available in Australia and offers significant advantages for electronic interface Drive by Wire installations.

    The ‘900’ Series product is suitable for multiple vehicle applications and will utilise vehicle specific as well as universal harnesses for various vehicle brands hence eliminating the requirement to carry multiple cruise control models. This has the potential to reduce your inventory requirements significantly.

    Calibration for your specific vehicle installation can be performed “on-road” with a similar procedure as the AP500 models or via a PC. This procedure is “state of the art” and allows for precise adjustments to suit vehicle characteristics or driver requirements.

    Installers will need to be qualified and approved by Command Auto prior to purchase.

    Choice of switches available to suit your customer’s preference is available separately (refer to switches listing).

    Pedal Harnesses
    • Universal harness for multi-fit applications allow ease of fit, choice and range • Dedicated harnesses to fit modern vehicle pedal ECU.

    Ask our Command team about which harness selection best suits your needs.

    AP900 can be programmed to suit factory switches in many vehicles.
    AP900 Series is suitable for use in vehicles with modern engine conversions.

    AP500 – ELECTRIC ACTUATOR CRUISE CONTROL KIT

    Suitable for installation by a Professional Installer or Dealership Technician.

    The AP500 will read the electronic speed signal from an electronic gearbox transducer, reed-switch speedometer, or ECU.

    Calibration to vehicle PPM range is achieved by “on-road calibration” while driving the vehicle. Vehicle PPM rate does not need to be verified.

    Cruise Control sensitivity and rate of initial engagement may be individually adjusted while driving the vehicle to suit the driver’s requirements.

    Suitable for most Australian and imported vehicles including four-wheel drives, light commercials with traditional throttle system.

    Approved for many “Drive-by-Wire” throttle system vehicles when fitted with optional “vehicle-specific” hardware kit.

    An optional clutch switch is recommended for vehicles with manual transmissions. Choice of switches available to suit your customer’s preference (available separately).

    Installation services available in Brunswick, Melbourne